#Enroute 4 toolbars software

By holding the shift key, the line will be drawn horizontal or vertical from the first point. Hold down the shift key and click the second point at the bottom of the rope. Click at the first point toward the bottom of the rope. Create a straight flat bottom on the contour by holding down the shift key while using the Cut by Line tool. Delete the relief from the copy you just made. Create a copy by holding down the Ctrl key while you left click and drag the relief.

To create a flat surface, follow the steps below. Adjusting the rope relief to have a flat bottom As you can see, the relief for the rope is rounded at the bottom. Add Rounded and experiment with the degree of angle. You can add more dimensions to the combined relief by using the Add Relief tool. Viewing the relief in perspective view, you can determine if you want to make further adjustments to the relief. Combine Reliefs using the weld reliefs tool. Overlap the contours and add Rounded Relief. Use Jigsaw tool to Create individual closed contours. Here is a review of the previous steps along with a few illustrations: Create dividing lines for the rope sections. Click on the Combine Selected Reliefs icon. Click and hold the Merge reliefs icon to open the flyout menu. Select each relief or draw a selection box around all of the reliefs to select them. Select all of the individual reliefs and combine them together using the Combine Selected Reliefs tool.

Viewing this in the perspective view will help you decide if this angle is the one that you want. Enter parameters: Add, Rounded, Normal Angle of 45. Select the contours for the rope and add a rounded relief. Click and drag the handles of the selection box to stretch the contour. The reason for this is so it looks more realistic when it is merged together. The sections of the rope were then stretched to overlap each other. Click the Jigsaw tool over each section to create the closed contour. The green line indicates the path of the contour. Click and drag on the curve handles to adjust the curve. Left click a second point on the contour. Left click on the contour to start the tool. Using the Smooth Approximation tool, go through the contours and simplify as needed. This will open the Edit Contours flyout menu. Use the following methods to go through all of the contours of the image to clean it up to the desired effect. In this design, the smooth approximation tool was used to reduce the points used in the drawing. 2Д¤ Using the Edit Contours tools EnRoute has a selection of point edit tools available. This tells you how much the drawing was simplified by the cleanup. EnRoute will display a dialog showing the before and after segment counts. This may take a little bit of experimentation to determine what tolerance would be best for the image.

#Enroute 4 toolbars software

Set the tolerance to the size of the smallest features you want the software to keep. Enter the cleanup tolerance and press OK.

Select the image and click on the cleanup tool icon. EnRoute can make the cleanup process an easy task. After the vectorization, there may still be a lot of cleanup work to do. This is an image of the vectorized bitmap. EnRoute will display a dialog which shows the progress of the vectorization. In this example the tolerance was set at Click OK. Set the parameters: Enhanced curves check Automatic cleanup and set a tolerance. Once you have imported the image, use the vectorization tool to convert the bitmap to vectors. 3 Import the Bitmap to EnRoute Open a new file in EnRoute and Import the bitmap to the file.